Kicker CompVR 07CVR154 15-Inch 4-Ohm DVC Subwoofer

Kicker CompVR 07CVR154 15-Inch 4-Ohm DVC Subwoofer Review

Kicker CompVR 07CVR154 15-Inch 4-Ohm DVC Subwoofer Feature

• 15-inch CompVR Subwoofer with 4-ohm impedance
• Injection-molded cone with 360-degree back bracing and aluminized coating; ribbed Santoprene surround
• 500 Watts RMS (1000 Watts peak) power handling
• 25-500 Hz frequency response
• One-year limited warranty

Amazon.com Product Description If you seek a round sub that delivers a high-performance upgrade in your ride, then look to the CompVR Subwoofer, with superior bass technology exceeding anything else in its class.

A round sub that delivers a high-performance upgrade in your ride. Click to enlarge.

Injection-molded cone totally eliminates flex with 360-degree back bracing and an aluminized coating. Click to enlarge.

The textured steel basket is surrounded by a dressed-to-kill logo trim piece. Click to enlarge.

The pedigreed CompVR is bred for success, getting its roots from the legendary KICKER Competition Subwoofer. The 2007 CompVR builds on this heritage with the highest levels of KICKER engineering prowess, from the motor's efficient top-plate design to the strong dual voice coils and overall motor structure. That allows the sub to handle more power and withstand more abuse. It also borrows premium KICKER Solo-Baric technology in its high-temperature wire, assuring absolute heat transfer without breakdown.

A new ribbed Santoprene surround gives the CVR added strength at high excursion. An injection-molded cone totally eliminates flex with 360-degree back bracing and an aluminized coating. It's the clearest, loudest bass yet from KICKER's signature round subwoofer.

Spring-loaded push terminals and perimeter venting are engineering standards found on every KICKER woofer. To top it off, the CompVR has a fresh look for 2007, one that is sure to please the crowd. The textured steel basket is surrounded by a dressed-to-kill logo trim piece that serves a dual purpose--it makes an edgy design statement and further strengthens the surround and woofer overall.

The KICKER CompVR Subwoofer arrives in four sizes, ranging from eight capable inches up to 15 big ones, with a sealed or vented box option.

CVR15 Features

• Legendary CompVR sound
• SoloKon for strength and accuracy
• T cut top plate for magnetic field strength
• Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
• Spiralead tinsel leads enable high excursion
• Ribbed Santoprene surround

What's in the Box
CVR15 subwoofer (4-ohm impedance), Installation hardware, User's manual COMPVR 15-INCH SUB 4-OHM DVC

Kicker 07DS6802 6-Inch X 8-Inch Component System with 20mm Tweeter (Pair)

Kicker 07DS6802 6-Inch X 8-Inch Component System with 20mm Tweeter (Pair) Review

Kicker 07DS6802 6-Inch X 8-Inch Component System with 20mm Tweeter (Pair) Feature

• Component system with two 6x8-inch mids, two tweeters, and two crossovers
• Midrange speakers utilize a high-tech cone, heavy-duty voice coils, and ribbed surround
• 45 Watts RMS (90 Watts peak) power handling
• 40 Hz-21kHz frequency response
• One-year limited warranty

Amazon.com Product Description Looking for exceptional sound at a great value? Look no further than the new-for-2007 DS-Series Component Systems, engineered to provide a solid complement to your bass without breaking the bank.

A great sounding set of component speakers at an affordable price. Click to enlarge.

Midrange speakers utilize a high-tech cone, heavy-duty voice coils, and ribbed surround.

Over-engineered, titanium-domed tweeters blend perfectly with the mids.

Superb mids and highs complete the musical quality of your ride. If you are in search of a great sounding set of component speakers at an affordable price, KICKER DS-Series four-speaker Systems excel like no others. DS System midrange speakers utilize a high-tech cone, heavy-duty voice coils, and ribbed surround, yet retain a reduced mounting depth for easy upgrades in a vehicle's doors or kick panels.

Over-engineered, titanium-domed tweeters blend perfectly with the mids, thanks to a solid two-way crossover/protection network, basically providing you front-row seats at the concert of your choice. Selectable tweeter attenuation and the slight mounting depth are just a couple of DS Component System features commonly found in higher-end systems.

If size is an issue in your ride, then there should be no problems here. Three sizes of DS Component Systems are available, including the DS600.2 System with 6-inch midrange speakers, the DS650.2 System with 6.5-inch mids, and the DS680.2 System with a handy 6x8-inch mid design specially made for Ford, DaimlerChrysler, and European vehicles.

DS600.2

• Smooth balanced sound at an entry level price point
• External attenuation switch on component crossover
• Perfect for OEM upgrade

What's in the Box
2 Speakers, 2 Grilles, 2 Tweeters, 2 Crossovers, Mounting hardware and cables, User's manual Samsung megapixel network camera

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure Review

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure Feature

• Sealed enclosure loaded with two 12-inch R1S412 subwoofers
• Constructed with 5/8" MDF and covered with high density carpet
• 600 watts maximum power handling, 300 watts RMS
• Parabolic polypropylene cone, design optimized for sealed enclosures
• High current binding posts

Need Rockford Fosgate bass in a hurry? Drop this dual 12" Prime Loaded enclosure in your ride and let the tunes bump. Featuring high current binding posts, 5/8" MDF construction, and finished with high density carpet, these loaded enclosures will produce more than enough bass.

Rockford Fosgate Prime Series Enclosures Rockford Fosgate took DNA from its big brother to provide a great performing bass enclosures. Constructed from heavy duty 5/8" MDF, these enclosures are built solid and will reproduce bass the way it's supposed to be; accurate and full of impact. The unique "Diamond R" stitching will let your friends know you mean business, and the high density carpet will make sure it looks as good as it sounds.

---

R1L-2X12 Features Enclosure Constructed with 5/8" MDF Covered with high density carpet High current binding posts R1S412 Subwoofer Parabolic polypropylene cone 12 AWG compression terminals 18 gauge stamped steel frame Optimized for sealed enclosures

Drop this dual 12" Prime Loaded enclosure in your ride and let the tunes bump. Click to enlarge.

Loaded with two 12-inch Rockford Fosgate R1S412 subs, optimized for sealed enclosures.

---

R1L-2X12 Specifications

Woofer Quantity:	2
Woofer Size:	12"
Woofer Series:	Prime R1S412
Woofer Impedance:	(2) 4-Ohm SVC Internally wired in parallel to create a 2-Ohm amplifier load
Power Handling:	300 Watts RMS 600 Watts Max
System Configuration:	Sealed
Enclosure Material:	5/8" MDF (Medium Density Fiberboard)
Speaker Connector:	Up to 12 AWG compression terminals
Dimensions:	14" H x 33.75" W x 12.25" D

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure, User's Manual

---

Need a Little More?

Step up to the Punch Series P1L-2X12 ported enclosure for even more solid performance.

---

Prime Series Pre-Loaded Enclosures

Rockford Fosgate Prime R1L-1X10 Single R1 10-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-1X12 Single R1 12-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-2X10 Double R1 10-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure

Rockford Fosgate Prime Double 12-Inch 4 Ohm pre-loaded enclosure. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Kicker 11S15L7D2 15 Solo-Baric L7 Car Subwoofer 2 OHM DVC "

Kicker 11S15L7D2 15 Solo-Baric L7 Car Subwoofer 2 OHM DVC " Review

Kicker 11S15L7D2 15 Solo-Baric L7 Car Subwoofer 2 OHM DVC " Feature

• The newest square masterpiece is relentless, delivering more decibels with the patented extra cone area
• As a Solo-Baric subwoofer, it uses KICKER's most innovative concepts and technology
• One-piece SoloKon with full back bracing for toughness and zero distortion
• Reliable stitched surround for minimizing cone flex4
• Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life

Solo-Baric L7 Subwoofer technology continues to maintain the title as the first and foremost authority on bass. It was the world's first patented square subwoofer, supplying the extra decibels needed for deep, musical bass in a mobile audio system. The Solo-Baric's cutting-edge, square-sub design ultimately means more cone area, more air displacement and, therefore, more decibels than a conventional round woofer. With a patented corner-ribbed, double-stitched Santoprene surround helping to hold the massive motor structure in place, the Solo-Baric L7 provides durability at a high excursion without compromising sound quality.Features:Tough-as-nails steel basket with perimeter venting for toughness 2- or 4-Ohm dual voice coil IMPEDANCE (Ohms) - 2 or 4 DVC POWER WATTS (peak/RMS) - 2000/1000 SENSITIVITY (dB 1w/1m) - 89.4

Kicker 10DC122 Enclosed Car Audio Subwoofer

Kicker 10DC122 Enclosed Car Audio Subwoofer Review

Vicious KICKER® CompTM-Loaded Sub Boxes dole outtruckloads of affordable bass. Whether it's menacing dual-sub enclosures that refuse to quit, a thin-profile box for your truck cab, or the vented VC12 housing a brutal 12-inch Comp Subwoofer, the onslaught of bottom end rumbling from your trunk or haul space makes the value of Comp-Loaded Sub Boxesthat much harder to believe.
The DC12 Dual-Sub Box gives outrageously expensive bass a bad name by offering a couple of updated round Comp woofers in a stout, gray-carpeted KICKER box with a monogrammed carbon-fiber front. All Comp Sub Boxes are vented for the most intense loudness.
Type Dual
Impedance (OHMS) 2 ohms
Number of Woofersand Size (in., cm) (2)12, 30
Max Rec AmplifierPower (WATTS PEAK/RMS)* 600/300
Top Depth (in., cm) 13-7/8, 35.2
Bottom Depth (in., cm) 17-1/4, 43.8
Height (in., cm) 16, 40.5
Width (in.,cm) 32-7/16, 82.3
World's best bass value, and ready to drop in a trunk
Ready-made, outrageous KICKER bass
Easy-to-use impedance designated at the terminal cup assembly
Injection-molded, polypropylene cone with bracing eliminates distortion
Tough KICKER wood enclosure
Dense gray carpeting
Monogrammed, carbon-fiber front baffle

Brand New Kicker 10zx400.1 400 Watt Rms Mono-block Class D Car Audio Amplifier with Top Mounted Controls and Upgraded Features

Brand New Kicker 10zx400.1 400 Watt Rms Mono-block Class D Car Audio Amplifier with Top Mounted Controls and Upgraded Features Review

Brand New Kicker 10zx400.1 400 Watt Rms Mono-block Class D Car Audio Amplifier with Top Mounted Controls and Upgraded Features Feature

• New Kicker ZX400.1 400RMS ZX Series Class D Monoblock Car Amplifier
• High efficiency MOSFET power supply
• LED power and protection indicators
• Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
• Variable low-pass filter (50-200 Hz, 24 dB/octave)

Brand new Kicker 10zx400.1 400 watt rms peak mono-block class D car audio amplifier with top mounted controls and upgraded features Features: New Kicker ZX400.1 400RMS ZX Series Class D Monoblock Car Amplifier RMS Power Rating (14.4V): 4 ohms: 200 watts x 1 chan. 2 ohms: 400 watts x 1 chan. High efficiency MOSFET power supply LED power and protection indicators Tuned Bass EQ (0-18 dB bass boost at 40 Hz) Variable low-pass filter (50-200 Hz, 24 dB/octave) High-pass subsonic filter (24 dB at 25 Hz) Preamp RCA outputs Boost, gain, and crossover frequencies are top-mounted for easy access Balanced differential inputs for noise elimination and factory-radio compatibility 3 Automatic turn-on modes (remote, DC offset, signal sense) High-density convection heat sink for extreme heat dissipation Gold-plated RCA level inputs Gold-plated screw terminals Input sensitivity: Low level: 125mV-5V High level: 250mV-10V CEA-2006 compliant amplifier Frequency response: 25-200 Hz Dimensions: 10-1/4"L x 9-5/8"W x 2-1/8"H Actual power exceeds rated power, documented inside each carton 4-gauge power and ground leads recommended

Kicker 10 TCVT12 4-Ohm 12" Enclosure Car Subwoofer

Kicker 10 TCVT12 4-Ohm 12" Enclosure Car Subwoofer Review

Slim-profile, KICKER® CompVTTM-Loaded Sub Boxesare perfect for pickup-truck seats that hug the back of the cab, with three sub sizes in tight, sealed enclosures. They are the smallest sub-loaded enclosures ever from KICKER labs, but still blistering, true high-performance KICKER woofers and boxes.
* Smallest sub-loaded enclosures from KICKER
* Dark gray modified-spoke cone with bracing for clear bass response
* Tough KICKER wood enclosure
* Dense gray carpeting
* Monogrammed, carbon-fiber front baffle

Take all the ground-breaking technology from the CompVT woofer - special four-layer voice coil, ventless solid-pole design allowing flush mount to the enclosure's back wall, space-minimizing binding posts - and combine itwith a legend - a tough KICKER wood box covered with dense gray carpeting.
The CompVT Subwooferitself with reduced mounting depth provides the real, head-pounding bass expected from a KICKER woofer, minus the bulk of a standard round KICKER woofer. The same holds true if you want to drop a ready-made bass enclosure behind the seat or under thehatch, and still have plenty of hauling space.
Impedance (OHMS) 4
Woofer (in., cm) 12, 30
MaxRec Amplifier Power (WATTS PEAK/RMS)* 800/400
Dimension A (in., cm) 3-7/8, 9.7
Dimension B (in., cm) 6-15/16, 17.6
Dimension C (in., cm) 13-7/16, 34.1
Dimension D (in., cm) 21-13/16, 55.3
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.

KICKER 12INCH SHALLOW MOUNTSUBWOOFER 4 OHM

KICKER 12INCH SHALLOW MOUNTSUBWOOFER 4 OHM Review

KICKER 12INCH SHALLOW MOUNTSUBWOOFER 4 OHM Feature

• Power Handling: Peak 800W
• Power Handling: RMS 400W
• Frequency Response: 25-350 Hz
• Impedance: 4 Ohm

Power Handling: Peak: 800 watts

Power Handling: RMS: 400 watts

Impedance: Single 4 Ohm

Shallow-mount, true high-performance woofer

Delivers extreme bass with minimum depth

2- or 4-Ohm four-layer voice coil for max power handling

Dark gray modified-spoke cone with bracing for clear bass response

Ventless solid-pole design for direct mount to enclosure rear wall

Steel clearance adapter plate replaces part of enclosure wall depth to further lessen depth

High-temp coil wire

Slender, strong steel basket with coil-cooling perimeter venting

Durable Spiralead tinsel leads

Tough double-stitched surround

Special spring-loaded binding posts for minimizing depth

Frequency response: 25-350 Hz

Mounting depth: 4-3/8"

Pyle PLA2200 2-Channel 1,400-Watt Bridgeable Mosfet Amplifier

Pyle PLA2200 2-Channel 1,400-Watt Bridgeable Mosfet Amplifier Review

Pyle PLA2200 2-Channel 1,400-Watt Bridgeable Mosfet Amplifier Feature

• 700 Watts x 2 Output Slim Size Amplifier Design For Easy Installation
• Variable Hi/Lo Electronic Crossover Network
• Gold Plated RCA Inputs Outputs
• Power And Protection LED Indicators
• 1400 watts x 1 Bridged Output

Amazon.com Product Description The Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier extends the Pyle tradition into a totally new series of amp, designed from the ground up to deliver the power, performance, and flexibility the modern car enthusiast demands.

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.

High-end performance at an affordable price. Click to enlarge.

Click to view features and controls.

Bass Boost Level Control
Permits adjustment of the bass level up to an increase of approximately up to 18dB.

Crossover Mode Selector
When used with normal, full range system, set this switch to "Full". If you wish to use the internal crossover to power a driver or specific frequency range, use the "LPF" or HPF" for the "Low Pass" or "High Pass" settings.

Input Level Controls
Enables the matching of levels to the output levels from the head unit (or other original source). The input sensitivity of adjustment ranges from 6V to 200mV.

Sub Sonic Control
When the sub sonic selector switch is in "On" mode, this filter control permits continuously variable adjustment from 10 to 100Hz.

Aux Line Outs
This amp features gold plated RCA Jacks for Aux line outputs. Use these outputs for unlimited systems expansion. Power Terminals
These connectors will deliver power, ground, and remote turn-on control to the amplifier.

Speaker Terminals
These terminals are 14K gold plated to guarantee high conductivity and minimum signal

Features include:

• Variable Hi/Lo Electronic Crossover Network
• Variable Input Level (Gain) Control
• Switchable Bass Boost
• Power and Protection LED Indicators
• Low Level Inputs
• Gold Plated RCA Inputs and Outputs
• Slim Size Amplifier Design For Easy Installation
• Thermal / Overload / Short Circuit Protection
• Anti-Thump Turn-on
• Soft Turn-On Circuit
• Remote Turn On/Off

What's in the Box
Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier, manual The Pyle Chopper series has been specially designed from the bottom up to provide quality sound in a sturdy form factor. You’ll be blasting your tunes and rocking the block with these amps. The PLA2200 is a two-channel, 1400-watt bridgeable power amplifier. It’s equipped with everything you’ve come to expect from quality car amplifiers – switchable bass boost, variable gain control, and a configurable electronic crossover network. The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. And this amp’s slim size makes installation a breeze – you’ll have no trouble finding a spot for this powerful little device. So chop up your tunes and play them for the world with the Pyle Chopper.

Kicker 11ds35 3.5 Coaxil Speakers Pair Rohs Co

Kicker 11ds35 3.5 Coaxil Speakers Pair Rohs Co Review

STILLWATER DESIGNS KICKER 3.5" COAXIL SPEAKERS PA

Kicker 08GL712 Square 12-Inch 300mm Cast Grille

Kicker 08GL712 Square 12-Inch 300mm Cast Grille Review

Kicker 08GL712 Square 12-Inch 300mm Cast Grille Feature

• Custom grill for Solo-Baric square subwoofers
• Protect and cover your speakers in style
• Cast aluminum construction
• Charcoal powder-coat finish
• Fits 12-inch L5 and L7 subs

Cover and protect your new Solo-Baric L5 or L7 square subwoofer with this custom grill from Kicker.

With its tough cast-aluminum construction and charcoal powder-coat finish, it's the perfect complement to killer Solo-Baric sound.

Fits 12-inch square L5 and L7 subs.

What's in the Box
Kicker 08GL712 Square 12-Inch 300mm Cast Grille SQUARE 12-INCH 300MM CAST GRILLE