Wednesday, February 29, 2012

Power Acoustik Crypt CPT1-2000 Monoblock 2,000-Watt Amplifier

Power Acoustik Crypt CPT1-2000 Monoblock 2,000-Watt Amplifier Review



Power Acoustik Crypt CPT1-2000 Monoblock 2,000-Watt Amplifier Feature

  • 2 ohm Stable Class A/B Mono-block
  • Selectable 45Hz, 6/12dB Bass Boost
  • Variable 12dB 20-50Hz Subsonic Filter
  • Bridged Synchronization (strap amps together for double power!)
  • MOSFET PSU Transistors
Big Power - Small price! Mono Block Features • 1 Ohm Load Stable Class A/B or D • Variable 12dB 50-250Hz LPF • Variable 12dB 20-50Hz Subsonic Filter (Class D) • Selectable 45Hz, 6/12dB Bass Boost • Freqency Response: 15-150Hz • Signal-to-Noise Ratio: 80dB • Total Harmonic Distortion: .5% • 180o Phase Switch (Class D) • Direct 2 ga. Power & 8 ga. Speaker Terminals • Dash Mount Remote Gain Control • Bridged Synchronization (strap amps together for double power!) • Extruded Aluminum Chassis • Black Texture Finish w/ Silver Trim & Cast Metal Badge • MOSFET PSU Transistors • Regulated PWM Power Supply • Three-Way Protection Circuitry (short, thermal & overload) • High Pass, Low Pass, and Subsonic Filters • Pre-Amp Outputs • 200mV-8V Low Level Input


Tuesday, February 28, 2012

Kicker 11ds68 6x8 Coaxil Speakers Pair Rohs

Kicker 11ds68 6x8 Coaxil Speakers Pair Rohs Review



Kicker 11ds68 6x8 Coaxil Speakers Pair Rohs Feature

  • Heavy-duty motor structure for improved performance
  • Balanced-dome tweeters for outstanding definition
  • Impedance (Ohms): 4
  • Frequency Response (Hz): 45-20k
  • 70 Watt Power Handling
# Drop-in factory upgrade for easy fitment into any vehicle # Heavy-duty motor structure for improved performance # Extended Voice Coil (EVCTM) technology for ultra-clean bass # Ribbed UV-treated surround for precise linear excursion and optimum sound # Balanced-dome tweeters for outstanding definition # Woofer (in., cm): 6x8, 16x20.0 # Tweeter (in., cm): 1/2, 1.3 # Impedance (Ohms): 4 # Max Rec Amp Power (watts PEAK/RMS): 70/35 # Sensitivity (dB 1w/1m): 90 # Frequency Response (Hz): 45-20k # Mounting Hole Diameter (in., cm): 5x7-3/16, 12.7x18.3 # Mounting Depth (in., cm): 2-3/8, 6.0


Monday, February 27, 2012

Kicker 08KS600 6-Inch 160mm Coax Speaker

Kicker 08KS600 6-Inch 160mm Coax Speaker Review



Kicker 08KS600 6-Inch 160mm Coax Speaker Feature

  • Pair of 6-inch coaxial speakers
  • Curvilinear, gray woofer cones with Santoprene surround and newly designed basket
  • 65 Watts RMS (195 Watts peak) power handling with 4-ohm impedance
  • 43 Hz-21kHz frequency response
  • One-year limited warranty
Amazon.com Product Description Does a serious factory upgrade, with more muscle at an affordable price, sound too good to be true? What it sounds like are some of the loudest, clearest coaxials ever hidden behind a door on under a back deck. And KICKER takes full responsibility.

Some of the loudest, clearest coaxials ever hidden behind a door on under a back deck. Click to enlarge.

Kaladex-domed tweeters with a stout neodymium magnet.

Curvilinear gray woofer cones with Santoprene surround.

Give factory sound a serious power injection with a KS-Series Coaxial Speaker upgrade. With added improvements on the woofers and tweaked tweeters, dropping them in where factory speakers were seems like a no-brainer. The curvilinear, gray woofer cones, Santoprene surround, and newly designed basket give KS Coaxials the extra brawn to deliver a smooth, rich sound at any volume.

The half- and three-quarter-inch, Kaladex-domed tweeters contain a stout neodymium magnet dipped in ferrofluid for maximum coolness, recreating highs that rival live performance.

KS Coaxes are available in 10 sizes, from the capable 3.5-inch up to the marine-ready 6 x 9. The line includes a 6 x 8 for special applications. If you're looking for more from your doors, there's also a KS6930 3-way system in the lineup with an additional one-inch midrange.

What's in the Box
Two KS600 speakers, Mounting hardware, Speaker wire, User's manual Kicker 08KS600 6-Inch 160mm Coax Speaker


Friday, February 24, 2012

Warhorse WX10000.1 - Kicker 1 Ch 20,000 Watt Amplifier

Warhorse WX10000.1 - Kicker 1 Ch 20,000 Watt Amplifier Review



Warhorse WX10000.1 - Kicker 1 Ch 20,000 Watt Amplifier Feature

  • Warhorse Series Monoblock Car Amplifier
  • Max power output: 20,000 watts x 1 chan.
  • Input sensitivity (Low level): 170mV-5V
Kicker Warhorse WX10000.1 - 10,000 watts RMS, Class D Monoblock Amplifier 07WX10000.1 Introducing the WX10000.1, KICKER's ultimate power play in car audio. Code name Warhorse, the WX10000.1 Signal-Modulated Subwoofer Amplifier is a massive marvel - more than 10,000 true watts surging to dual-voice-coil subwoofers with the highest power-handling capabilities.


Thursday, February 23, 2012

Kicker CompVT 08CVT654 6.5-Inch 4-Ohm 165mm SVC Subwoofer

Kicker CompVT 08CVT654 6.5-Inch 4-Ohm 165mm SVC Subwoofer Review



Kicker CompVT 08CVT654 6.5-Inch 4-Ohm 165mm SVC Subwoofer Feature

  • 6.5-inch CompVT shallow-mount subwoofer with 4-ohm impedance
  • Injection-molded cone with 360-degree back bracing and aluminized coating; ribbed Santoprene surround
  • 150 Watts RMS (300 Watts peak) power handling
  • 25-350 Hz frequency response
  • One-year limited warranty
Amazon.com Product Description Last year KICKER showed the world that slim and hard-hitting can go together in a true high-performance subwoofer. Now, we've taken it two steps slimmer with the new CompVT 6.5- and 8-inch Subwoofers, giving you even more legit bass options in a smaller space.

Comp performance in a slimmer package. Click to enlarge.

Specialized four-layer voice coil provides the CVT the capabilities to work with large amounts of power. Click to enlarge.

Injection-molded cone with ribbed Santoprene surround. Click to enlarge.

With the same creative inspiration that brought the world the 10- and 12-inch CompVTs in 2007, these subwoofers inherit the same technology running through the CVT family. Ventless, solid-pole design allows it to be mounted directly against the rear wall of a sealed or vented enclosure, permitting the CVT8 to perform with a mounting depth of less than 3-3/8 inches, and the CVT65 with less than 2-13/16 inches! Spring-loaded binding posts are also mounted differently than standard subwoofers to minimize size. And, you can subtract enclosure wall depth from the equation as well with a substitution steel "clearance" adapter plate.

Don't let the smaller sizes suggest this is not a "true" subwoofer! The 8-inch CVT8 handles 200 watts RMS (400w peak) and the 6.5-inch CVT65 handles 150 watts RMS (300w peak). Each woofer's injection-molded cone is shaped to provide maximum excursion from a slender basket, and a specialized four-layer voice coil provides the CVT the capabilities to work with large amounts of power, but in a slimmer package.

KICKER CVT subwoofers utilize many of the same characteristics as other KICKER subwoofers, like Spiralead tinsel-lead technology that allows for better strength, durability, and flexibility. Perimeter venting, high-temp coil wire, Uniplate backplate and pole, double-stitching, and logo trim ring around the steel basket's outer edges are also features the CVT inherits. And with the cone's modified spoke design, 360-degree back bracing, and ribbed Santoprene surround, the CVT becomes another KICKER subwoofer bound to shake the car audio world.

CVT65 Features

  • Legendary KICKER sound
  • Flat SoloKon for strength and accuracy
  • T cut top plate for magnetic field strength
  • Single coil
  • Pole vents are rear of cone
  • Clearance plate included
  • Spiralead tinsel leads
  • Ribbed Santoprene surround

What's in the Box
CVT65 subwoofer (4-ohm impedance), Installation hardware, User's manual COMPVT 65-INCH SVC 165MM SUB 4-OHM


Wednesday, February 22, 2012

Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier

Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier Review



Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier Feature

  • 4 x 90 Watt stereo amplifier
  • Built-in 12dB/octave high-, low-, or all-pass electronic crossover variable from 50 to 200 hertz
  • KICKEQ Boost offers up to 18 decibels of bass centered at 40 Hz
  • Balanced differential inputs for noise elimination
  • One-year limited warranty
ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.

Trouble-free amplification and loud, clear sound. Click to enlarge.

All ZX Amps are now outfitted with differential RCA inputs.

Add a remote bass control to easily tweak your sound on the fly.

ZX-Series Amplifiers return for 2008 as reliable as ever--21 no-fault options to run a complete car audio system. Two-channel, four-channel, three- and five-channel hybrids, and absurd single-channel subwoofer amps round out a hard-working, noise-free lineup known for supplying the force until the listener shuts the music down. And now all ZX Amps are outfitted with differential RCA inputs, completely eliminating unwanted whines and audio trash and making for the most enjoyable listening experience possible. Differential inputs and new automatic turn-on modes make ZX Amps some of the most complete power producers on the market.

ZX Multi-Channel and Hybrid Amplifiers
Six ZX-Series Multi-Channel Amplifiers put the choice of system installation in your hands. Power ranges from 50 watts x 4 channels up to 215 watts x 4, giving the user plenty of system decisions to make. These amps carry the same crossover and KICKEQ Bass Boost as the stereo amps, but they also include a useful fader dial. Two popular hybrid models among the multi-channel amps feature a sub-rattling, 420-watt Class D channel to go along with 85 watts/channel in the ZX.3 amp and the 85 watts x 4 in the ZX.5 amp. Boost remains available, but through the sub sections only.

ZX350.4 Features

  • 3 automatic turn-on modes
  • Balanced differential inputs for noise elimination
  • RCA inputs have direct speaker level input capability
  • Easily removable top allows for custom painting
  • Optional end caps
  • 2 ohm stability on all amps
  • Angled power connections

What's in the Box
ZX350.4 amplifier, Mounting hardware, User's manual ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.


Tuesday, February 21, 2012

Kicker 11S15L34 Solo Baric 15 Sq Sub 4 Ohm Dvc

Kicker 11S15L34 Solo Baric 15 Sq Sub 4 Ohm Dvc Review



Kicker 11S15L34 Solo Baric 15 Sq Sub 4 Ohm Dvc Feature

  • 15-Inch Square Subwoofer
  • 1000 Watts Max Power(Peak)
  • 500 Watts RMS Power
  • One-piece SoloKon with full back bracing for toughness and zero distortion
  • Tough-as-nails steel basket with perimeter venting for toughness
**SIZE [in, cm]:15, 38 **IMPEDANCE [Ohms]:2 or 4 DVC **POWER WATTS [peak/RMS]:1000/500 **SENSITIVITY [dB 1w/1m]: 90.3 **MOUNTING DEPTH [in, cm]:8-1/8, 20.6 **MOUNTING DIAMETER [in, cm]: 13-3/4, 34.9 **MIN SEALED BOX VOL [cu. ft, L]:1.8, 51 **MAX SEALED BOX VOL [cu. ft, L]:5.2, 147 **MIN VENTED BOX VOL [cu. ft, L]:3, 85 **MAX VENTED BOX VOL [cu. ft, L]:5, 142


Kicker CompVR 07CVR152 15-Inch 2-Ohm DVC Subwoofer

Kicker CompVR 07CVR152 15-Inch 2-Ohm DVC Subwoofer Review



Kicker CompVR 07CVR152 15-Inch 2-Ohm DVC Subwoofer Feature

  • 15-inch CompVR Subwoofer with 2-ohm impedance
  • Injection-molded cone with 360-degree back bracing and aluminized coating; ribbed Santoprene surround
  • 500 Watts RMS (1000 Watts peak) power handling
  • 25-500 Hz frequency response
  • One-year limited warranty
Amazon.com Product Description If you seek a round sub that delivers a high-performance upgrade in your ride, then look to the CompVR Subwoofer, with superior bass technology exceeding anything else in its class.

A round sub that delivers a high-performance upgrade in your ride. Click to enlarge.

Injection-molded cone totally eliminates flex with 360-degree back bracing and an aluminized coating. Click to enlarge.

The textured steel basket is surrounded by a dressed-to-kill logo trim piece. Click to enlarge.

The pedigreed CompVR is bred for success, getting its roots from the legendary KICKER Competition Subwoofer. The 2007 CompVR builds on this heritage with the highest levels of KICKER engineering prowess, from the motor's efficient top-plate design to the strong dual voice coils and overall motor structure. That allows the sub to handle more power and withstand more abuse. It also borrows premium KICKER Solo-Baric technology in its high-temperature wire, assuring absolute heat transfer without breakdown.

A new ribbed Santoprene surround gives the CVR added strength at high excursion. An injection-molded cone totally eliminates flex with 360-degree back bracing and an aluminized coating. It's the clearest, loudest bass yet from KICKER's signature round subwoofer.

Spring-loaded push terminals and perimeter venting are engineering standards found on every KICKER woofer. To top it off, the CompVR has a fresh look for 2007, one that is sure to please the crowd. The textured steel basket is surrounded by a dressed-to-kill logo trim piece that serves a dual purpose--it makes an edgy design statement and further strengthens the surround and woofer overall.

The KICKER CompVR Subwoofer arrives in four sizes, ranging from eight capable inches up to 15 big ones, with a sealed or vented box option.

CVR15 Features

  • Legendary CompVR sound
  • SoloKon for strength and accuracy
  • T cut top plate for magnetic field strength
  • Polyimide (Kapton) coil former with Nomex reinforcement for high thermal capability
  • Spiralead tinsel leads enable high excursion
  • Ribbed Santoprene surround

What's in the Box
CVR15 subwoofer (2-ohm impedance), Installation hardware, User's manual Samsung Megapixel Network Camera


Monday, February 20, 2012

Kicker 10DC104 Dual Vented Sub Enclosure Loaded with 2 Comp Subwoofers

Kicker 10DC104 Dual Vented Sub Enclosure Loaded with 2 Comp Subwoofers Review



STILLWATER DESIGNS Dual Vented Sub Enclosure Loaded w/2 Comp SubwoofersVicious KICKER® CompTM-Loaded Sub Boxes dole out truckloads of affordable bass. It's menacing dual-sub enclosures just refuse to quit, the onslaught of bottom end rumbling from your trunk or haulspace makes the value of Comp-Loaded Sub Boxes that much harder to believe.Dual-Sub Boxes giveoutrageously expensive bass a bad name by offering a couple of updated round Comp woofers in a stout, gray-carpeted KICKER box with a monogrammed carbon-fiber front. All Comp Sub Boxes are vented forthe most intense loudness.World's best bassvalue, and ready to drop in a trunkReady-made,outrageous KICKER bassEasy-to-use impedance designated at the terminal cup assemblySingle-woofer boxes 4 OhmsInjection-molded, polypropylenecone with bracing eliminates distortionTough KICKER wood enclosureDense gray carpetingMonogrammed, carbon-fiber front baffleImpedance(OHMS): 4Number of Woofers and Size (in., cm) (2)10, 25Max Rec Amplifier Power (WATTS PEAK/RMS)* 600/300Top Depth (in., cm) 13-1/2, 34.2Bottom Depth (in., cm) 16-3/8, 41.5Height (in., cm) 14, 35.5Width (in., cm) 28-1/2, 72


Saturday, February 18, 2012

Kicker 11KS65 6.5 inch. 2-Way KS Coaxial Speakers, 195W Max / 65W RMS (Kicker KS 6.5)

Kicker 11KS65 6.5 inch. 2-Way KS Coaxial Speakers, 195W Max / 65W RMS (Kicker KS 6.5) Review



Kicker 11KS65 6.5 inch. 2-Way KS Coaxial Speakers, 195W Max / 65W RMS (Kicker KS 6.5) Feature

  • 6-3/4" KS Series Car Speakers
  • Power Handling:Peak: 390 watts per pair / 195 watts each,RMS: 130 watts per pair / 65 watts each
  • Injection molded polypropylene cone woofer
Mounting depth: 2-1/8" 4 ohms impedance Neodymium magnet with ferrofluid 3/4" Santoprene surround Titanium dome tweeter


Thursday, February 16, 2012

Kicker 11VS12L32 Solo Baric 12l3 Sub Vented 2 Ohm

Kicker 11VS12L32 Solo Baric 12l3 Sub Vented 2 Ohm Review



Kicker 11VS12L32 Solo Baric 12l3 Sub Vented 2 Ohm Feature

  • SINGLE 12" L3 SOLO-BARIC IN ENCLOSURE
  • 800 WATTS PEAK
  • 400 WATTS RMS
  • 2 OHMS
  • WARRANTY ONLY ON WOOFERS!
KICKER VS12L32 SINGLE 12" L3 2-OHM SOLO BARIC IN ENCLOSURE


Wednesday, February 15, 2012

Kicker 100W Car Audio Stereo Input Sub Amp with Housing

Kicker 100W Car Audio Stereo Input Sub Amp with Housing Review



Kicker 100W Car Audio Stereo Input Sub Amp with Housing Feature

  • Designed and manufactured by Kicker
  • Mono Class-D amplifier
  • 100 watts RMS into a 1 ohm load
  • Optimized for low impedance speakers
  • Unique DC offset-sensing turn-on circuitry
This small yet powerful subwoofer amplifier is designed and manufactured by Kicker, one of the most recognized names in car audio. It was offered originally as a dealer installed subwoofer upgrade for specific OEM stereo systems. Features include stereo high level inputs (line level inputs are not included), 100 watts RMS @ 1 ohm power output, and a 150 Hz @ 12 dB/octave fixed low pass filter. Includes Kicker logo housing and OEM connector (not shown). Dimensions: 4 H x 7-1/4 W x 1-7/8 D. Buyout, limited quantities.


Tuesday, February 14, 2012

Kicker 07DS350 3.5-Inch 89mm Coax Speakers (Pair)

Kicker 07DS350 3.5-Inch 89mm Coax Speakers (Pair) Review



Kicker 07DS350 3.5-Inch 89mm Coax Speakers (Pair) Feature

  • 3.5-inch coaxial speaker with reduced mounting depth for easy upgrades in doors or kick panels
  • Injection-molded polypropylene cone with UV-treated ribbed surround
  • 15 Watts RMS (30 Watts peak) power handling with 4-ohm impedance
  • 80 Hz-20kHz frequency response
  • One-year limited warranty
Amazon.com Product Description Great sounding, easy-to-install midrange and highs make all the difference in your audio system. DS-Series Coaxial Speakers and 3-Way System provide the cost-effective ammo to keep up with your bass upgrade.

DS-Series Coaxial Speakers provide the cost-effective ammo to keep up with your bass upgrade.

A breeze to install. Click to enlarge.

Polypropylene cone with UV-treated ribbed surround.

DS Speakers are the best value for serious, drop-in upgrades in your doors. The woofers bear a polypropylene cone, UV-treated ribbed surround, enduring voice coil, and an interior-pleasing fresh look. The half-inch tweeters take the performance cues of higher-end coaxials, using a super-strong neodymium magnet and PEI (polyether imide) dome for louder, better-sounding highs.

The DS Series comes in eight different sizes, including the new DS650 with 6.5-inch midrange drivers. DS Coaxials fit any speaker cutout, starting from the 3.5-inch DS350 up to a handy 6 x 8 DS680 if your ride requires them. The 6 x 9 offering is actually the thrashin' DS6930 3-way system which mixes in an additional 2-inch mid.

DS350 Features

CIMP (Curvilinear Injection-Molded Polypropylene Woofer Cones)
A high performance composite, which remains rigid, minimizes cone flex and lowers harmonic distortion. The CIMP consists of a one-piece, injection-molded polypropylene material that moves as a piston, exhibiting power and control.

Enhanced BAM (Basket and Motor) Assembly
Utilizes a high strength steel basket, features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly.

Optimized Polyfoam Ribbed Surround Radius
This allows extended cone excursion for additional bass output and higher SPL, and couples the suspension into a conjoined linear-motion body.

High-Temp Polyimide Film Voice Coil Former
improves sonic and conductive properties, and prevents thermal-electrical meltdown.

PEN Dome Tweeter with Neodymium Magnet
Provides a smooth high frequency response with quick, detailed and spatially-correct imaging. PEN is an acronym for the space age material "biaxially oriented polypropylene naphthalate film"--your parents' tax dollars probably paid for its development, you might as well enjoy it.

High-Power Tinsel Lead Wires
These eliminate broken leads and power loss, due to the common use of "insufficient-gauge" lead wires.

Ferro-Fluid
Cooled tweeter voice-coil extends the high frequency transducer's life span.

What's in the Box
DS350 speaker (pair), Cable, Grille, Installation hardware, User's manual 35-INCH 89MM COAX SPK PAIR